BMW

A Custom BMW R80ST by La Motocicletta

The BMW R80ST is one of the rarer and more unusual motorcycles from the German marque’s 1980s catalogue. It’s essentially a more street-oriented version of the legendary BMW R80G/S, the motorcycle that largely invented the modern dual sport adventure motorcycle genre.
Only a few thousand examples of the BMW R80ST were built between 1982 and 1984 with only 1,000 or so making it to the USA. It wasn’t a successful model for BMW, particularly when compared with the runaway success of the R80G/S, but the R80ST has found a loyal following of riders who love it for its toughness, its reliability, and its good road handling.
The BMW R80ST uses the same basic engine as the R80G/S, a 798cc air-cooled, horizontally-opposed twin with two push rod actuated overhead valves per cylinder. The engine and 5-speed transmission are of unit construction, and the bike uses an enclosed shaft drive to the rear wheel.
The slightly longer travel suspension used on the R80G/S was replaced with shorter, more road-suitable suspension on the R80ST, and the 21 inch front wheel of the R80G/S was replaced with a 19 inch unit on the R80ST. Braking is accomplished with a drum at the rear and a single disc up front, and the R80ST featured a different seat and a different, slightly larger fuel tank than its sibling.




Despite its relatively low production numbers we’ve seen a few custom BMW R80STs over the years. Custom motorcycle builders love them for the same reasons their owners love them, and the model is now in demand by enthusiasts around the world.
This BMW R80ST has been comprehensively rebuilt by the team at La Motocicletta, in fact its engine was completely disassembled and reassembled with R100 components – increasing both the capacity and power output with almost no externally visible changes.


La Motocicletta is run by Massimo Zancai, a specialist motorcycle engineer who is frequently contracted by major manufacturers including Aprilia and Moto Guzzi to fabricate complex parts for custom concept motorcycles. He’s responsible for many of the parts on the Aprilia RS-660 and the Moto Guzzi MGX-21, concept motorcycles from 2019 and 2017 respectively.
With La Motocicletta, Massimo enjoys the chance to built motorcycles as he wants them to be, he’s not dealing with clients or anyone else for these builds so he can specify everything from start to finish.




This custom required a complete strip down, the engine was rebuilt as mentioned above and the front and rear suspension were not completely replaced. A new adjustable monoshock was fitted to the rear using custom mounts to modify the geometry and an entirely new front end was fitted with adjustable upside down forks, twin four pot Tokio radial disc brakes with aftermarket rotors.

Ben Branch